Performing the Update Registration Procedure to Change
your Address
This procedure is to be used if you have changed address.
First contact your Customer Service to update your details, then you will be instructed to
perform the update registration procedure.
Updating Registration
Check that your Mailing System is connected to the network before starting.
How to Run the Registration Update
To run the registration update:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 7.4 or select the path:
Maintenance Processes
A confirmation message is displayed.
2. Press [OK] .
3. Select Update registration (or type 6)
4. Press [OK] to start the connection to postal services.
5.
Press after the call is completed.
10
Maintaining your Mailing System
219
| Page 219 | feb-14-2014 12:06 |
To Next Page
Loading...
