Running Mail
To run mail, follow the procedure below after you have completed the steps in How to
Process Incoming Mail (Settings) on page 53 .
How to Process Received Mail (Running Mail)
On the [Received ] home screen:
1.
Press . System motors start running.
2.
Insert the mail piece into the mail path against the rear-guide wall, side to be printed
facing upwards.
3. The Mailing System applies the imprint and the mail piece is sent to the catch tray.
3
Processing Mail
55
| Page 55 | feb-14-2014 12:06 |
To Next Page
Loading...
