Hasler IM440 PLUS - How to Change the Default Rate; How to Change the Default Text

How to Change the Default Rate
To change the default rate:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 3.3.3 or select the path:
Default user settings Default imprint parameters Default rate
2. Select the default rate using the rate wizard.
3. Press [OK] to validate.
See also
•
Managing Postal Rates on page 196
Changing the Default Text
How to Change the Default Text
To change the default text:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 3.3.1 or select the path:
Default user settings Default imprint parameters Text
2. Select the Default text from the list.
3. Press [OK] to validate.
See also
•
Managing Custom Text Messages on page 191
170
| Page 170 | feb-14-2014 12:06 |
8
Configuring your Mailing System