Hasler IM440 PLUS - How to Create an Operator

Operator Management
Follow the steps outlined below to create, modify, activate/deactivate or delete operators.
See also
•
Operator Options on page 105 .
•
To print the current list of operators, see Operator List Report on page 126 .
Creating Operators
In order to create an operator you must first set up an “Account
with Access Control” in “Account Mode Management” Mode.
How to Create an Operator
To create an Operator:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 5.3 or select the path:
Account management Manage operators
The Manage Operator screen is displayed.
2. Select Operator List .
The Operator list screen is displayed.
106
| Page 106 | feb-14-2014 12:06 |
5
Managing Accounts and Assigning Rights