How to Display Hardware Data
To display hardware data:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 7.1.2 or select the path:
Maintenance System info Hardware information
2. The system hardware data appears on the screen.
How to Display the Event Lists
To display the event lists:
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 7.1.3 or select the path:
Maintenance System info Event list
2. Select the Base events list (or type 1 ) or the PSD events list (or type 2 ) or
Server connection history (or type 3 )
3. Press [OK] to validate.
4. The system displays the selected list in a table with, for each error:
The Code of the event
The Date where appends the event
The Cycles count when the event occurred.
The Description
The Category
5. Note the Code and refer to your customer service.
232
| Page 232 | feb-14-2014 12:06 |
11
Troubleshooting
To Next Page
Loading...
