Hasler IM440 PLUS - Frequently Asked Questions

Frequently Asked Questions
System check list:
AnswerQuestion...
Look at the funds counter at the bottom of the screen,
or:
Press and enter 1 to check your funds balance.
To add funds, see How to Add Funds to the PSD
(Meter) on page 82.
Do I have enough postage?
Clear batch counters if you intend to issue a report
on the mail run you are about to start (see Batch Data
Report on page 117).
Select Reset counter on the home screen, or
See How to Reset Batch Counters on page 74.
Do I need to clear the Batch
Counter ?
For sealing while printing the envelopes.
See How to Fill the Sealer Bottle on page 211.
Is the sealing/moistening device
properly filled?
(if installed)
Before laying envelope(s) on the Weighing Platform,
your Home Screen should display 00 lb 0.0 oz . If __lb
_._oz is displayed, perform a 'rezero' of the WP.
See How to Rezero the Weighing Platform on page
165.
Is the Weighing Platform properly
zeroed or tared?
See How to Fill the Automatic Label Dispenser on
page 76.
Are labels in place in the ALD ?
(if you plan to print on tape)
To display the level of ink in the printing headset, see
How to Display Ink Level and Cartridge Data on page
204.
Is there enough ink in the car-
tridge ?
You can be warned when the available funds gets below a preset
value (see How to Set the Low-Funds Threshold on page 161 ).
3
Processing Mail
37
| Page 37 | feb-14-2014 12:06 |