Entering Weight Manually
You can enter the weight manually if a mail piece exceeds the weighing capacity of all your
weighing platform.
If this situation occurs, you will need to print the postage amount on a label to stick onto
the mail piece.
How to Enter the Weight Manually
To enter the weight manually from the home screen, you must first select the postal
class:
1. Either:
Press and type 2.2 or select the path:
Job settings Weighing type
Press
or
The Weighing mode screen is displayed.
2.
Select Manual weight entry .
The Manual weight entry screen is displayed.
3. Enter the weight (first lb then oz ) and press [OK] to validate.
4.
Press to return to the home screen.
The home screen displays the Manual Weight Entry icon ( ) and the weight
entered.
66
| Page 66 | feb-14-2014 12:06 |
3
Processing Mail
To Next Page
Loading...
