Hasler IM440 PLUS - How to Re-Date Mail (Running Mail)

How to Re-Date Mail (Running Mail)
The postage amount 0 is displayed on the home screen. To print postage directly
on to mail pieces:
1.
Press . System motors start running.
2.
Insert the mail piece(s) into the mail path against the rear-guide wall, with the side to
be printed facing upwards (see How to Use the Feeder on page 39 ).
The side that you want to print on should be facing upwards.
If a mail piece is bigger than mail path maximum thickness (see
Mail Specifications on page 237 ), press before you press
to print a label. The label is printed.
3.
The Mailing System applies postage and the mail piece (or label) is sent to the catch
tray.
Otherwise, if you want to print several identical labels :
1.
Press and enter the number of labels.
Make sure the labels are available in the Label Dispenser (see Filling the Label
Dispenser on page 76 ).
2.
Press to print labels.
52
| Page 52 | feb-14-2014 12:06 |
3
Processing Mail