3. Set postage to 0 manually, to be sure that it will remain on zero.
Type 0 on the home screen to open the Manual amount screen and then just press
[OK] . For more details, see How to Enter Postage Manually on page 62 .
4. To change the type of stamp , select Stamp type and then select [Standard ] in the
Type of stamp screen. For more details, see How to Change the Current 'Type of
Stamp' on page 36 .
To change the date or date format from the Customize stamp screen as follows:
Select Date and then select a date option in the Date Advance Screen. Select No
Date Advance for printing today's date. For more details, see How to Change the Date
on page 68.
Press to return to the home screen.
You can also apply the optional setting:
1. Move the stamp away from the envelope edge for thick envelopes: see How to
Move the Stamp (Print Offset) on page 71 .
2. Seal envelopes : see Using the Sealing Function on page 73 .
You are now ready to print.
Running Mail
3
Processing Mail
51
| Page 51 | feb-14-2014 12:06 |
To Next Page
Loading...
