Hasler IM440 PLUS - Cleaning the Mail Path; How to Clean the Brushes and Sponge (Sealer)

Cleaning the Mail Path10.3
Cleaning the mail path includes:
•
Cleaning sealer/moistener brushes and sponge (if installed)
•
Cleaning feeder belts and rollers
•
Cleaning the Mailing System sensors on the mail path.
Cleaning Brushes and Sponge of the Sealer
How to Clean the Brushes and Sponge (Sealer)
MAKE SURE YOUR SYSTEM IS DISCONNECTED FROM POWER
SOURCE BEFORE CLEANING!
To clean the brushes and sponge of the feeder:
1. Open the feeder and push the left of the upper blue release lever to raise the upper
drive assembly.
2. Pull up the brush release lever.
213
| Page 213 | | feb-14-2014 12:06 |
10
Maintaining your Mailing System