Hasler IM440 PLUS - How to Set LAN (High-Speed Internet) Parameters

LAN Settings
LAN settings can only be performed if the machine is connected to
the LAN at power-up.
How to Set LAN (High-speed Internet) Parameters
To set the parameters of the LAN :
1. As supervisor (see How to Log in as Supervisor on page 148 ):
Press and type 9.2 or select the path:
Communication settings LAN settings
The LAN configuration menu is displayed.
2. Select:
- DHCP ON
- DNS AUTO ON
- HALF DUPLEX
and press [OK] four times for a standard LAN configuration.
Analog Telephone Line and Modem Settings
These settings include the modem parameters, telephone number and prefix that the Mailing
System calls to fund the meter or connect to Online Services (see Money Operations on
page 77 ).
Make sure the telephone line is selected: see How to Set the
Postal/Online Services Connection on page 177 .
178
| Page 178 | feb-14-2014 12:06 |
8
Configuring your Mailing System