94
Error Code Error Message Error Condition Troubleshooting
W1650 No sample rack
Sample rack is not set.
No sample rack has been
loaded.
Load a sample rack.
I5920 Turn the power ON
30 days or more have passed from when
the analyzer was started. For stable system
performance, turn the power ON.
A long time has passed since
startup.
Switch the analyzer off and on.
W66xx Input value ERR
Check input value and reenter.
The entered value is incorrect. Check the entered value and enter it again.
7.3 Slide Code Table
Slide Code Slide Code
Test Test Code Sample Code Test Test Code Sample Code
GLU -P 10 50 GGT -P 30 50
BUN -P 11 50 GOT/AST -P 31 50
UA -P 13 50 GPT/ALT -P 32 50
TCHO -P 14 50 CPK -P 33 50
NH
3
-P 15 50 LDH -P 34 50
TG -P 16 50 ALP -P 35 50
CRE -P 17 50 v-AMY -P 43 50
TP -P 18 50 v-LIP -P 44 50
ALB -P 20 50 TCO
2
-P 45 50
TBIL -P 21 50 Na 91 00
Ca -P 23 50 K 92 00
IP -P 24 50 Cl 93 00
Mg -P 28 50
NOTE: Slide codes are subject to change without notice. Check the slide code printed
on the slide box.
To Next Page
Loading...
