38
2. Canceling the remaining sample application after interrupting
sample application.
If STOP is touched while the analyzer is interrupted, the
remaining sample application is canceled. If the cancel
operation is completed, the LCD changes to [Ready to test]. All
sample rack displays get switched off.
4.1.2 Requesting a STAT test
You can request a STAT test by touching STAT.
NOTE: The STAT sample is measured after the sample that was
currently running has finished.
NOTE: A STAT test can be requested for 1 sample only.
(Example) Requesting a STAT test for Sample C after Sample A and
B were loaded, and Sample A is being applied.
1. Touch STAT.
To Next Page
Loading...
