42
4.3 Slide Loading Order When Measuring Different Items Simultaneously
NOTE: Any order of slide stacking can be measured. However, please follow the recommended slide stacking rules below.
Otherwise, the analyzer may consume excessive amounts of disposal tips and cups.
1. It is recommended to load an ISE slide first.
If a CM slide is loaded after an ISE slide, an extra tip will be used.
6. Touch START to begin retesting.
4.4 Automatic Acquisition of Sample Information (Work Lists)
If the device is connected to a PC using a validated software program, you can receive patient IDs and their sample
information by touching at the Measurement preparation screen before measurement.
1. Touch . The analyzer receives a work list (a list of patients and
the samples to be measured) from the PC.
To Next Page
Loading...
