104
8.4.4 Unit conversion
Configure the main unit and secondary unit for each measurement
item. The following table shows the units that can be used for each
configuration item and the conversion coefficient.
Test Test Code Unit (A) UNIT (B)
Conversion
Coefficient Test Test Code Unit (A) UNIT (B)
Conversion
Coefficient
GLU 10 mg/dL mmol/L 0.05551 GGT 30 U/L kat/L 0.0167
BUN 11 mg/dL mmol/L 0.357 GOT/AST 31 U/L kat/L 0.0167
UA 13 mg/dL mol/L 59.48 GPT/ALT 32 U/L kat/L 0.0167
TCHO 14 mg/dL mmol/L 0.02586 CPK 33 U/L kat/L 0.0167
NH
3
15 g/dL mol/L 0.7139 LDH 34 U/L kat/L 0.0167
TG 16 mg/dL mmol/L 0.01129 ALP 35 U/L kat/L 0.0167
CRE 17 mg/dL mol/L 88.4 v-AMY 43 U/L kat/L 0.0167
TP 18 g/dL g/L 10 v-LIP 44 U/L kat/L 0.0167
ALB 20 g/dL g/L 10 TCO
2
45 U/L mmol/L 0.0167
TBIL 21 mg/dL mol/L 17.1 Na 91 mmol/L mmol/L 0.0167
Ca 23 mg/dL mmol/L 0.25 K 92 mEq/L mmol/L 0.0167
IP 24 mg/dL mmol/L 0.3228 Cl 93 mEq/L mmol/L 0.0167
Mg 28 mg/dL mmol/L 0.4114
NOTE: Unit (B) = Unit (A) × Conversion coefficient
NOTE: BUN measured value in Unit (B) (mmol/l) is shown as molar concentration of Urea.
• Touch unit of measurement to be used for each test type.
To Next Page
Loading...
