96
Function Menu Items Settings Advanced Settings Reference Section
Mode function for
administrator
Language setting – 8.4.1
Host connection setting
None
Serial connection
LAN connection
8.4.2
Calculated parameter – 8.4.3
Unit conversion – 8.4.4
Switch measurement range display – 8.4.5
Reference interval range setting – 8.4.6
Sample No./IC setting – 8.4.7
Work list selection setting
Sample ID/Patient name
Patient ID /Patient name
8.4.8
Correlation coefficients – 8.4.9
Lot compensation coefficients – 8.4.10
Dilution setting – 8.4.11
Tube setting for diluent and reference fluid
Diluent
Reference fluid
8.4.12
Print setting for measured result
Number of printing sheets
Print order
8.4.13
Operator ID setting – 8.4.14
Test item name setting
Display and printout
Data transmission
8.4.15
Error log – – 7.1.1
8.2 Control
This mode is not used for Heska Chemistry Control. If Control mode is entered accidentally, cycle power to cancel control mode.
To Next Page
Loading...
