Heska Element DC5X - Light Source Lamp; 1.15 Recording Paper; Labels

6
1.16 Labels
The following safety labels are affixed to the Element DC5X Analyzer.
caution label
Moving parts
Biohazard label
Biohazard label
Biohazard label
High temperature
caution label
Lamp caution label
Name-plate
Power button
Power switch
| : Depress to power ON
O : Depress to power OFF
Sampler cover lock
key caution label
1.14 Light Source Lamp
CAUTION:
The light source lamp gets very hot. Before replacing the lamp, turn the power off, wait at least 5 minutes, and then check
that the lamp has cooled.
1. The light source lamp is a precision halogen lamp. Do not touch the glass surface of the lamp with your bare hands.
2. The lamp is a consumable with a lifetime. Always keep a spare lamp on hand in case the lamp burns out.
1.15 Recording Paper
1. Use specified recording paper for the Element DC5X Analyzer.
2. If other recording paper is used, the printer head section may be damaged.