79
Error code Error Description Reference Section
E5500 Signal system error inside circuit board. 7.2.8
E5510
Slide position offset during measurement. 7.2.5
E5901
Signal system error inside circuit board. 7.2.8
E6200, E6201, E6210
Communication error. 7.2.12
Error code Error Description Reference Section
W0020 The disposal box is open. 7.2.13
W0022 The disposal box is full. 7.2.13
W0030 Insufficient light intensity. 7.2.5
W0036 Reference black plate soiling. 7.2.5
W0040 The sample type configuration and sample type of the slide do
not match.
7.2.10
W0042 Sample rack configuration error. 7.2.10
W0060 Insufficient sample. 7.2.4
W0090 The ISE slide is loaded in reverse. 7.2.10
W0091, W0092 ISE measurement error. 7.2.11
W0120 Sample surface cannot be detected. .2.4
W0123, W0129 Liquid volume error. 7.2.4
W0140 Liquid volume error. 7.2.4
W0141–W0144 Liquid volume error. 7.2.4
W0151, W0152 Mixing cup error. 7.2.4
W0170
QC card has not been read. 7.2.9
W0173 The slide information has not been read. 7.2.3
W0214 Slide transfer error. 7.2.6
W0500–W0503 Malfunction of the internal fan. 7.2.13
W0704
ISE measurement unit motor error. 7.2.6
W0904
Interference filter motor error. 7.2.5
W1004, W1014
Sampler vertical operation error. 7.2.4
W1104
Sampler horizontal operation error. 7.2.4
W1204
Syringe operation error. 7.2.4
W1404
Sample application unit feed error. 7.2.6
W1604
Sample disk motor error. 7.2.6
W1650
A sample rack has not been loaded. 7.2.13
W1652
Slide transfer error. 7.2.6
W1654
Sample rack configuration error. 7.2.10
W1700–W1702,
W1704–W1706
Malfunction of the QC card reader. 7.2.9
W1703
QC card read ERR. 7.2.9
W4010
QC type has not been read. 7.2.9
W4011
Panel card error. 7.2.9
W4012
DI card error. 7.2.9
W4013, W4014
QC card error. 7.2.9
W4460–W4475
Signal system error inside circuit board. 7.2.8
W4500, W4501,
W4502
Serial communication error. 7.2.12
W4510
LAN communication error. 7.2.12
W4520
Error related to work list. 7.2.12
To Next Page
Loading...
