Hettich HettCube 200 - Page 107

107 / 174
en
12.2020 / Rev. 02
AB66005
Operation
Sleep mode
Fig. 168: Sleep mode
1 [Clear input] button
2 [Conrmation] button
3 Keypad
2.
Screen lock
Fig. 169: ‘Screen’ menu, ‘Screen lock’
‘Admin PIN’ input
1 [Conrmation] button
To set sleep mode, proceed as follows:
1. Tap on the sleep mode value.
Y
ou can now either
■ select the existing value by tapping it and entering a new
value via the keypad or
■ delete the existing value with the
[Delete entry] button and
entering a new value via the keypad.
Conrm the entry with the [Conrmation] button.
The sleep mode function is inactive with the
setting ‘0 Min’.
To activate/deactivate the screen lock, proceed as follows:
1. Tap on the
[Activate/deactivate screen lock] switch to activate/
deactivate the screen lock.
2. Enter the
‘Admin PIN’ and conrm the input with the [Conrma-
tion] button.

The screen lock is active/inactive.