Fig. 191: ‘Operating hours’ menu
Fig. 192: ‘Logbook’ menu
1 Logbook time period
Manual and program mode
6.13.15 Hours of operation
In this menu, the individual operating hours are dis-
played to you.
The operating hours of the individual assemblies/functions are dis-
played.
6.13.16 Logbook
There are the following options for calling up the log-
book:
− Device settings
− With the "Logbook" button in an alarm banner
− With the "Logbook" button from an event over-
view (blue banner)
The "Logbook" tab is divided into
■ Overview
– Details of the last manual mode
– Details of the last program mode
Always in this or
der
■ List of error messages. The displayed logbook time period refers
only to the list of err
or messages.
In the logbook, the information about the running and last executed
program and manual mode are displayed.
Every time the door is opened represents a disturb-
ance. If a door is left open for a longer period of time,
this can be reconstructed based on the logbook.
The following information and events are added up and shown in a
list.
■ Number of door openings and their total duration.
■ Start/End of the program/manual mode.
■ Pauses and continuations in program mode.
Fig. 193: Logbook