Hettich HettCube 200 - Combination of Standstill Mode with Incubation Mode (Energy-Saving Mode)

en
12.2020 / Rev. 02
AB66005
164 / 174
Examples
Fig. 227: ‘Day/night
simulation ’program
Fig. 229: ‘Energy-saving mode’
program
Set the program as shown

Chapter 6.12.2 ‘Cre-
ating a program’ on page 70.
Please take the starting time into account

‘Timer’
on page 86.
B.7 Combination of standstill mode with incubation mode (energy-saving mode)
Mon Tue Thu
1
Fri Sat SunWed
37
°C
4
Mon
PS1
P
S2
PS3
PS4PS4
PS3
P
S2
Fig. 228: Diagram ‘Combination of standstill mode with incubation
mode (energy-saving mode)’
1 Starting time (Thursday, 12:00 p.m.)
PS Program segment
Operating mode:
Program mode; Temperature prole with standstill segment
Set the program as shown

Chapter 6.12.2 ‘Cre-
ating a program’ on page 70.
During standstill mode, the incubator is not regu-
lated, but the current interior temperature is dis-
played.
Please take the starting time setting into account

‘Timer’ on page 86.