EasyManua.ls Logo

Hettich HettCube 200 - Hettcube 400

Hettich HettCube 200
174 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
en
12.2020 / Rev. 02
AB66005
136 / 174
Technical data
Maximum load per standard feed 50 kg
Maximum total load 80 kg
1)
W
ithout door handle and access port (Ø 42 mm).
2)
With Switchboard option (external socket strip)
3)
With glass door +6 kg.
4)
Lowest settable temperature -5 °C. Reaching a temperature < 0°C
depends on the ambient conditions, however.
All temperature data was measured at an ambient temperature of
22°C and in acc. with DIN 12880:2007-05. The data applies to incu-
bators with standard equipment.
9.3 HettCube 400
Manufacturer Andreas Hettich GmbH & Co. KG, D-78532 Tuttlingen
Model HettCube 400
Type 64000 64000-01
Mains voltage (± 10 %) 220-240 V 1~ 100-120 V 1~
Mains frequency 50-60 Hz
Connected load 450 VA/850 VA
2)
500 VA/900 VA
2)
Energy consumption at 37°C 0.046 kWh/h
Inner volume 310 l
Ambient conditions (EN / IEC 61010-1)
Set-up site Indoors only
Height Up to 2000 m above sea level
Ambient temperature 16°C to 35°C
Humidity Maximum relative humidity 75%, non-condensing.
Overvoltage category (IEC
60364-4-443)
II
Degree of contamination 2
Device protection class I
Noise level 41 dB(A)
Not suitable for use in explosion-endangered areas.

Table of Contents

Related product manuals