Hettich HettCube 200 - Initial Commissioning

35 / 174
en
12.2020 / Rev. 02
AB66005
Commissioning
1
Fig. 28: Device switch
1 Device switch [ON/OFF]
Fig. 29: Initialization
Fig. 30: ‘Language’ selection
1 ‘Language’ selection
Fig. 31: ‘Language’ selection list
5.2.3 Initial commissioning
1. Switch on the incubator at the device switch.
The incubator can be operated via the
touchscreen. The touchscreen can also be
operated with latex gloves.

The control will start up.
2. Tap on the
‘Language’ selection.
3. Tap on the corresponding language.