Hettich HettCube 200 User Manual

167 / 174
en
12.2020 / Rev. 02
AB66005
Accessory overview
C Accessory overview
Details concerning the specication of the technical
data can be found in the complete catalogue or the
Product Guide.
Order No. Article
Incubator, cooling incubator of the HettCube series
Options and accessories
60503 Independent PT 100 sensor
For independent temperatur
e measurement, four-wire system, temperature
values output with analogue output 4-20 mA on the back of the device
60521 Switchboard
4-fold socket strip, as a unit controllable via touchscreen, on the back of the
device
60042 Passive dehumidication
Allows the individual or time-contr
olled actuation of a ventilation opening in the
incubator via the touchscreen.
60525 USB port blocker
To lock the service interface (USB). Protect against unauthorized access.
60013 Glass door
All-glass outer door
, for HettCube 600 | 600 R
60029 Glass door
All-glass outer door
, for HettCube 400 | 400 R
60030 Glass door
All-glass outer door, for HettCube 200 | 200 R
60001 Shelf (set)
Made of stainless steel, with standar
d rails, max. load (kg): 50
60031 Shelf (HTS set)
Made of stainless steel, with telescopic rails, pull out up to 70 %, max. load (kg):
40
60024 Drawer (HTS set), 30 mm high
Made of stainless steel, with telescopic rails, pull out up to 70 %, tightly welded,
max. load (kg): 40
60025 Drawer (HTS set), 65 mm high
Made of stainless steel, with telescopic rails, pull out up to 70 %, tightly welded,
max. load (kg): 40

Hettich HettCube 200 Specifications

General

Brand	Hettich
Model	HettCube 200
Category	Laboratory Equipment
Language	English