EasyManuals Logo

Hettich HettCube 200 User Manual

Hettich HettCube 200
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
139 / 174
en
12.2020 / Rev. 02
AB66005
Technical data
Spatial temperature deviation at
25 °C
± 0.1 K
Recovery time (after door open for
30 s) at temperatur
e setpoint 37
°C
4.5 min
Dimensions
Interior dimensions
W x D x H 535 x 690 x 850 mm
Exterior dimensions
W x D
1)
x H 710 x 825
1
x 1425 mm
Weight approx. 128 kg
3)
Maximum load per standard feed 50 kg
Maximum total load 100 kg
1)
W
ithout door handle and access port (Ø 42 mm).
2)
With Switchboard option (external socket strip)
3)
With glass door +10 kg.
4)
Lowest settable temperature -5 °C. Reaching a temperature < 0°C
depends on the ambient conditions, however.
All temperature data was measured at an ambient temperature of
22°C and in acc. with DIN 12880:2007-05. The data applies to incu-
bators with standard equipment.
9.5 HettCube 600
Manufacturer Andreas Hettich GmbH & Co. KG, D-78532 Tuttlingen
Model HettCube 600
Type 66000 66000-01
Mains voltage (± 10 %) 220-240 V 1~ 100-120 V 1~
Mains frequency 50-60 Hz
Connected load 450 VA/850 VA
2)
500 VA/900 VA
2)
Energy consumption at 37°C 0.056 kWh/h
Inner volume 520 l
Ambient conditions (EN / IEC 61010-1)
Set-up site Indoors only
Height Up to 2000 m above sea level

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hettich HettCube 200 and is the answer not in the manual?

Hettich HettCube 200 Specifications

General IconGeneral
BrandHettich
ModelHettCube 200
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals