Hettich HettCube 200 - Return Shipments

13 / 174
en
12.2020 / Rev. 02
AB66005
Introduction
■ 1 x mains cable, 2.5 m (design according to country)
■ 2 x keys
■ 1 x plug for access port on the rear wall
■ 1 x HTS* slide-in module with telescopic rails
■ 1 x standard slide-in module (HettCube 200/200 R)
■ 2 x standard slide-in modules (HettCube 400/400 R)
■ 3 x standard slide-in modules (HettCube 600/600 R)
* HTS: Hettich T
ray System
1.8 Return shipments
If it is necessary to send back the incubator or its accessories to Het-
tich,
■ request the return documents necessary for this from Hettich or
the r
esponsible Hettich sales partner. These contain the return
number as well as a clearance certicate form for the returned
article.
■ Due to the legal regulations and especially to protect the Hettich
sales partner and Hettich employees, clean and disinfect the incu-
bator and accessories and certify that it is harmless with your sig-
natur
e (clearance certicate).
■ If the clearance certicate is missing, Hettich r
eserves the right to
invoice the customer for the costs for cleaning and disinfection.