Storage conditions
Transport
HettCube
200/200 R
HettCube
400/400 R
HettCube
600/600 R
Drawer (HTS set), height 65 mm (kg) 5,8 5,8 5,8
Drawer (HTS set), height 105 mm (kg) 6,6 6,6 6,6
Rack (set) for inclined storage of cultures
(Loewenstein) (kg)
3,8 3,8 3,8
Rack (HTS set) for inclined storage of cul-
tures (Loewenstein) (kg)
4,9 4,9 4,9
Rack for inclined storage of cultures (Loe-
wenstein) (kg)
3,3 3,3 3,3
Rack (set) for Petri dishes (kg) 2,2 2,2 2,2
Rack (HTS set) for Petri dishes (kg) 3,3 3,3 3,3
Rack for Petri dishes (kg) 1,7 1,7 1,7
Frame L for inclined storage of cultures
(kg)
0,9 0,9 0,9
Frame XL for inclined storage of cultures
(kg)
1 1 1
Tab. 2: Weights
DANGER
A danger is posed by penetrating liquids.
Ther
e is an electric shock hazard for personnel.
− If liquid has penetrated into the incubator, the
incubator must not be put into operation.
− In such a case, contact a service technician of the
manufactur
er.
■ The incubator can be stored in the original packaging.
■ The incubator may only be stored in dry rooms.
■ The storage temperature must be between -20 °C and +60 °C.
■ The humidity must be non-condensing and must be between 10
% and 80 %.
■ Before transporting the incubator, make sure that all connection
lines ar
e removed and the incubator is cleaned out.
To Next Page
Loading...
