Temperature drop
The temperature drop is only available in manual
mode on incubators with a cooling unit.
If the current manual mode contains a temperature
drop, this is indicated in the HettCube activities
Further information on page 54.
Multiple temperature drops can be created. Additions and changes
to the temperature drop can also be made during incubator opera-
tion.
The temperature drop offers the following options
■ Temperature drops can also be used on holidays or individual
dates.
■ Denition of r
epetitions, such as recurring weekly programs.
All set temperature drops have the same dropped
temperature. The dropped temperature can also be
higher than the temperature setpoint of manual
mode.
In the case of a time-delayed start of manual mode,
pay attention to the starting time. Under certain cir-
cumstances, this could lie at a temperature drop.
This would result in starting operation with a temper-
ature drop. Check to make sure this is desired.
To Next Page
Loading...
