If the incubator is in manual or program mode, not all
setting options can be operated during the run;
these are then greyed-out, such as the date and
time. To use all setting options, the incubator must
be in standstill mode.
About
Chapter 6.13.1 ‘About’ on page 95
Date & time
Chapter 6.13.2 ‘Date & time’
on page 95
Temperature
Chapter 6.13.3 ‘Temperature’
on page 96
Tolerance band
Chapter 6.13.4 ‘Tolerance band’
on page 97
Temperature guard
Chapter 6.13.5 ‘Temperature guard’
on page 98
Control contact
Chapter 6.13.6 ‘Control contact
(option)’ on page 101
Language
Chapter 6.13.7 ‘Language’
on page 105
Sound
Chapter 6.13.8 ‘Sound’ on page 105
Door
Chapter 6.13.9 ‘Door’ on page 106
Screen
Chapter 6.13.10 ‘Screen’ on page 106
Power failure
Chapter 6.13.11 ‘Power failure’
on page 108
Failure alarm
Chapter 6.13.12 ‘Failure alarm’
on page 109
Export
Chapter 6.13.13 ‘Export’ on page 109
Import
Chapter 6.13.14 ‘Import’ on page 112
Hours of operation
Chapter 6.13.15 ‘Hours of operation’
on page 114
Logbook
Chapter 6.13.16 ‘Logbook’
on page 114
System information
Chapter 6.13.17 ‘System information’
on page 115
Admin access
Chapter 6.13.18 ‘Admin access’
on page 115
Service dashboard
Chapter 6.13.19 ‘Service dashboard’
on page 118
To Next Page
Loading...
Need help?
General
