Hioki MEMORY HiLOGGER LR8450 User Manual

160
Managing Data
3.5 Managing Data
This section describes how to manage data stored on an SD Memory Card or a USB Drive that has
been inserted into the instrument.
The following operations are available:
• Formatting the SD Memory Card or USB Drive (p. 139)
• Loading les (p. 157)
• Moving between folders (p. 161)
• Deleting data (p. 162)
• Renaming les or folders (p. 163)
• Copying data (p. 164)
• Sorting les (p. 165)
• Updating le information (p. 166)
Switching media (drives)
This section describes how to select the media (SD Memory Card or USB Drive) on which to
perform le operations.
If an SD Memory Card is inserted into the instrument, the screen will display a list of les on the SD
Memory Card.
If a USB Drive is inserted into the instrument, the screen will display a list of les on the USB Drive.
1
Press the FILE key.
A screen listing the les on the SD Memory Card or USB Drive will be displayed.
2
Press the FILE key.
Each time you press the FILE key, the display will switch between the SD Memory Card and the
USB Drive.
HIOKI LR8450A964-03
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Hioki MEMORY HiLOGGER LR8450 Specifications

General

Storage Media	SD card (up to 32 GB)
Measurement Types	Voltage, Temperature, Resistance, Strain, Pulse, Logic
Sampling Rate	1 ms to 1 hour
Interface	LAN, USB, SD card slot
Power Supply	100 to 240 V AC, 12 V DC
Resolution	16-bit
Voltage Range	±10 mV