1.12 Starting and Stopping Measurement
Press the START key to start measurement.
Press the STOP key to stop measurement.
When the [Operation error prevention] setting is [ON], an operation conrmation window will be
displayed. Press the ENTER key while [Yes] is selected to start measurement.
Starting measurement after stopping it will cause the measurement data in the instrument’s internal
buer memory to be deleted. Save important data on an SD Memory Card or a USB Drive before
starting measurement again.
• Measurement can also be stopped automatically at the set recording time.
See “1.3 Setting Measurement Conditions” (p. 18).
• You can prevent misoperation of the START and STOP keys.
See “7.1 Conguring Settings” (p. 212).
• You can start recording operation when specic conditions occur. This functionality is
convenient when you wish to monitor conditions for anomalies.
See “2 Trigger Function” (p. 113).
Measurement operation
Press the START key. Press the STOP key.
Measurement
Downtime
Set recording time
Recording time Repeat recording: OFF Repeat recording: ON
Time specied
(STOP key not pressed)
Measurement
start
Measurement
stop
Recording time
Measurement
Measurement start
Measurement
stop
Recording time
Downtime
Measurement
Repeats processes until measurement stop.
Time specied
(If the STOP key
is pressed while
measurement is in
progress)
Measurement
start
Measurement
stop
Recording time
Measurement
Measurement start Measurement stop
Recording time
Downtime
Measurement
Continuous recording
Measurement
start
Measurement
stop
Measurement
(Same as when repeat recording is OFF)
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
