Hioki MEMORY HiLOGGER LR8450 User Manual

17
Registering Wireless Modules
Deregistering the Wireless Modules
You can deregister the wireless modules.
You can register up to seven wireless modules in the LR8450-01.
If required, deregister the unwanted wireless modules.
>
1
1
2
2
3
3
1
Press the ENTER key while [Delete] is selected.
The window prompting you to select the modules you wish to deregister will be displayed.
2
Select the check box of the modules you wish to deregister.
You cannot select any plug-in modules.
3
Press the ENTER key while [Execute] is selected.
The instrument will deregister the selected wireless modules.
You can use the wireless module to deregister.
Press and hold the RESET key for 5 s or longer while the wireless module’s CONNECT LED is
o󰀨 or blinking. The module will be deregistered.
While the CONNECT LED remains on, which indicates that the wireless module is
communicating with the LR8450-01, you cannot deregister using the module. Please use the
communicating LR8450-01 to deregister the wireless module.
Settings and Operation
HIOKI LR8450A964-03
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Hioki MEMORY HiLOGGER LR8450 Specifications

General

Storage Media	SD card (up to 32 GB)
Measurement Types	Voltage, Temperature, Resistance, Strain, Pulse, Logic
Sampling Rate	1 ms to 1 hour
Interface	LAN, USB, SD card slot
Power Supply	100 to 240 V AC, 12 V DC
Resolution	16-bit
Voltage Range	±10 mV