66
Entering Comments
Module identiers
This section describes how to enter an identier (string of text) for each module. (Up to 16
characters)
See “Text entry method” (p. 10).
You can use module identiers to identify modules when using multiple modules.
>
1
1
Select [Unit identier] with the Left Arrow, Right Arrow, Up Arrow, and Down Arrow keys and
press the ENTER key.
The text entry window will open.
See “Text entry method” (p. 10).
2
Enter text and press the ENTER key.
The entered text will be accepted.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com