Hioki MEMORY HiLOGGER LR8450 User Manual

72
Conguring Channels in a List
Copying channel settings
This section describes how to copy one module’s settings to another module.
> > [Unit n], [Remote n] (n = 1, 2, . . .)
2
2
3
3
1
1
4
4
5
5
1
Press the ENTER key while [Copy...] is selected.
The settings window will open.
2
Under [Original], select the copy source unit and channel.
3
Under [Copy items], select the checkboxes for the items you wish to copy.
4
Under [Copy to], select the checkboxes for the units and channels to which you wish to
copy the settings.
5
Select [OK] and press the ENTER key.
The settings will be copied.
Pressing the ENTER key while [Cancel] is selected to cancel the copy operation.
HIOKI LR8450A964-03
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Hioki MEMORY HiLOGGER LR8450 Specifications

General

Storage Media	SD card (up to 32 GB)
Measurement Types	Voltage, Temperature, Resistance, Strain, Pulse, Logic
Sampling Rate	1 ms to 1 hour
Interface	LAN, USB, SD card slot
Power Supply	100 to 240 V AC, 12 V DC
Resolution	16-bit
Voltage Range	±10 mV