Hioki MEMORY HiLOGGER LR8450 User Manual

261
Acquiring Data Using the FTP Server
9.6 Acquiring Data Using the FTP Server
This section describes how to use the instrument’s FTP server function to acquire les from the
instrument using a computer.
The le transfer protocol (FTP) is a protocol for sending les over a network.
You can use an FTP client on a computer to download les from an SD Memory Card or a USB
Drive connected to the instrument.
You will connect to the HTTP server from a computer.
3
3
4
4
2
2
1
Launch Internet Explorer
®
on the computer.
2
Enter the instrument’s address into the address bar (for example, ).
3
Click [DATA GET BY FTP].
4
Click [FTP DATA GET FROM SD CARD & USB FLASH DRIVE].
A list of folders on the SD Memory Drive and USB Drive connected to the instrument will be
displayed.
Communicating with a Computer (PC)
HIOKI LR8450A964-03
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Hioki MEMORY HiLOGGER LR8450 Specifications

General

Storage Media	SD card (up to 32 GB)
Measurement Types	Voltage, Temperature, Resistance, Strain, Pulse, Logic
Sampling Rate	1 ms to 1 hour
Interface	LAN, USB, SD card slot
Power Supply	100 to 240 V AC, 12 V DC
Resolution	16-bit
Voltage Range	±10 mV