290
Sending Emails
Email authentication
The instrument supports POP authentication (POP before SMTP) and SMTP authentication for
email.
Congure the settings as necessary.
> >
2
3
4
5
6
1
7
1
Press the ENTER key while [E-mail settings...] is selected.
The settings window will open.
2
Select the authentication method to use for email under [Mail authentication] on the [Auth.]
tab.
OFF
Do not authenticate.
POP Use POP authentication (POP before SMTP).
Set the server name, port number, account name, and password.
SMTP Use SMTP encryption.
Set the account name, authentication method, and password.
3
Enter the POP3 server’s name or IP address in the [Server name] eld.
String of up to 45 single-byte characters
4
Enter the POP3 server’s port number in the [Port number] eld.
1 to 110
to 65535
5
Enter the authentication user account in the [Account name] eld.
String of up to 45 single-byte characters
6
Select the method supported by the SMTP server under [Authentication method].
LOGIN
, PLAIN, CRAM-MD5
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
