Hioki MEMORY HiLOGGER LR8450 User Manual

208
Performing Waveform Calculations
Copying calculation formulas
This section describes how to copy the calculation for calculation channel [W1] to the other
calculation channels ([W2] to [W30]).
> >
2
2
3
3
1
1
4
4
1
Press the ENTER key while [Copy...] is selected.
The settings window will open.
2
Under [Original], select the copy source channel.
3
Under [Copy to], select the checkboxes for the channels to which you wish to copy the
settings.
4
Press the ENTER key while [OK] is selected.
The calculation formulas will be copied.
Press the ENTER key while [Cancel] is selected to cancel it.
HIOKI LR8450A964-03
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Hioki MEMORY HiLOGGER LR8450 Specifications

General

Storage Media	SD card (up to 32 GB)
Measurement Types	Voltage, Temperature, Resistance, Strain, Pulse, Logic
Sampling Rate	1 ms to 1 hour
Interface	LAN, USB, SD card slot
Power Supply	100 to 240 V AC, 12 V DC
Resolution	16-bit
Voltage Range	±10 mV