Hioki MEMORY HiLOGGER LR8450 User Manual

178
Conguring Alarms
1
1
8
8
7
7
6
6
5
5
4
4
3
3
2
2
9
9
1
1
Alarm type
9
9
Level and time used to judge whether alarm
conditions are met (level/time)
• For the module
When the data refresh interval or recording
interval is longer than the value set in Box 8,
the data refresh interval or recording interval,
whichever is longer, will be set.
• For the pulse or waveform calculation
When the recording interval is longer than
the value set in Box 8, the time is set to the
recording interval.
In both cases, the level is calculated as
follows:
(Level) = (Value set in Box 7)
× {(Time) / (Value set in Box 8)}.
2
2
Slope for Alarm [Level]
3
3
Level for Alarm [Level]*
4
4
Direction for Alarm [Window]
5
5
Upper limit value for Alarm [Window]*
6
6
Lower limit value for Alarm [Window]*
7
7
Level for Alarm [Slope]*
8
8
Time for Alarm [Slope]
The alarm slope time cannot be set to
a value that is less than 1 sec.
*: The instrument expresses strain in terms of micro epsilon (μ
ε
). You do not need to enter the SI prex micro (μ).
HIOKI LR8450A964-03
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Hioki MEMORY HiLOGGER LR8450 Specifications

General

Brand	Hioki
Model	MEMORY HiLOGGER LR8450
Category	Data Loggers
Language	English