Hioki MEMORY HiLOGGER LR8450 User Manual

268
Sending Data Using the FTP Client
4
Right-click the item displayed under
[Connections] on the left pane and
click [Add FTP Site...] on the shortcut
menu.
Communications may be blocked
depending on how any security software
(for example, a rewall) has been
congured.
5
Enter the [FTP site name].
Example: ftp
In [Physical path] under [Content
Directory], specify the location where
data from FTP clients should be saved.
Example: C:\inetpub\ftproot
Click [Next].
6
Set [Binding] and [SSL] as follows:
[IP Address] [All Unassigned]
[Port] [21]
[Start FTP site
automatically]
Select.
[SSL] [No_SSL]
Click [Next].
HIOKI LR8450A964-03
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Hioki MEMORY HiLOGGER LR8450 Specifications

General

Storage Media	SD card (up to 32 GB)
Measurement Types	Voltage, Temperature, Resistance, Strain, Pulse, Logic
Sampling Rate	1 ms to 1 hour
Interface	LAN, USB, SD card slot
Power Supply	100 to 240 V AC, 12 V DC
Resolution	16-bit
Voltage Range	±10 mV