26
Connecting the RM2611 Electrode Resistance Meter’s Power Cord
2.4 Connecting the RM2611 Electrode Resistance
Meter’s Power Cord
1
2
1
Verify that the RM2611 Electrode
Resistance Meter’s main power switch (on
the rear of the instrument) is in the OFF (○)
position.
2
Verify that the outlet provides the correct
supply voltage and connect the power
cord to the power inlet on the instrument.
3
Insert the power cord’s male plug into the
outlet.
If power is interrupted while the
instrument is turned on (for example, by
tripping a circuit breaker), the instrument
will start up the next time power is
supplied even if the standby key is not
pressed.
To Next Page
Loading...
