Hioki RM2610 - Operating the RM9004 Test Fixture Using Only the Up;Down Lever (Disabling the Lock Release Lever)

46
Loading an Electrode Sheet into the RM9003 Press Unit
Operating the RM9004 Test Fixture using only the up/down lever
(disabling the lock release lever)
IMPORTANT
When the lock release lever is disabled, the RM9004 Test Fixture can be raised and lowered using only the
up/down lever. Exercise care not to pinch your ngers or other body parts by unintentionally lowering the
RM9004 Test Fixture.
1
2
1
Verify that the up/down lever is in the
raised position.
2
Move the lock disable pin toward the
inside while pulling the lock release lever
toward you.
The lock release lever will be disabled, allowing
the RM9004 Test Fixture to be raised and lowered
using only the up/down lever.
To reenable the lock release lever, perform this
procedure in reverse to return the pin to its original
position.