5
Product Components
Product Components
The RM2610 Electrode Resistance Measurement system (“the product”) consists of the
components in the table below. To purchase an option*
1
, please contact your authorized Hioki
distributor or reseller.
Product Description Accessories
RM2611 Electrode Resistance Meter
Potential measurement
(Calculated based on
resistance values)
• Instruction manual*
2
• Operating Precautions
(0990A905)
• Power cord
• USB cable
• Z2001 Temperature Sensor
RM2612 Resistance Calculation
Software*
1
Measurement and control
software
• Instruction manual (this
manual)*
2
• PC application CD*
3
• USB license key
RM9003 Press Unit*
1
Measurement
(The RM9003 Press Unit
is used to connect the
RM9004 Test Fixture.)
• Instruction manual*
2
• Quick manual
RM9004 Test Fixture*
1
Measurement
(The RM9004 Test Fixture
is connected to the RM2611
Electrode Resistance Meter
in order to measure the
composite layer resistivity
and interface resistance of
lithium-ion battery electrode
sheets.)
• Instruction manual*
2
• Test xture case
• Mounting screws ×4
• Probe inspection board
RM9005 Connection Cable*
1
Connection • Instruction manual*
2
*1
Options are subject to change. Please check Hioki’s website for the latest information.
*2
The latest version of each instruction manual can be downloaded from Hioki’s website.
*3
The PC application software can be updated to the latest version (p. 110).
10
9
8
7
6
5
4
3
2
1
Index
To Next Page
Loading...
