Hioki RM2610 - RM2612 Resistance Calculation Software

78
RM2612 Resistance Calculation Software
7.2 RM2612 Resistance Calculation Software
General specications
Operating requirement
(PC)
CPU: Intel
®
Core™ i7, 2.4 GHz, 4 threads or better (recommended)
RAM: 8 GB or more recommended (4 GB available RAM required)
Hard disk: 2 GB or more available space
Display: 1024 × 768 pixels or more, 65536 colors or more
Interface: USB 2.0 or better
Operating system: Windows 7 (32-bit/64-bit)
Windows 8 (32-bit/64-bit)
Windows 10 (32-bit/64-bit)
Microsoft .NET Framework 4.8
Accessories See p. 5
Product warranty period 1 year
Functional specications (PC application functions)
Analysis parameters • Composite layer volume resistivity [
Ω
cm], composite layer surface resistivity [
Ω
cm
2
]
(user-switchable)
• Interface resistance [
Ω
cm
2
]
Analysis method Inverse problem analysis of potential distribution using the nite volume method
Display and output format • Composite layer volume resistivity and interface resistance
Exponential notation: 4 signicant digits, “0.000E+00,” “
Ω
cm/
Ω
cm
2
”
• Temperature
Decimal notation, “00.0°C”
Measurement times
(representative values)
• Contact check: 4 s
• Auto range: 8 s
• Potential measurement: 18 s (MEDIUM)
• Analysis: 30 s (until completion using the standard iteration number)
Total: Approx. 60 s
Conditions
• Observed values when measuring a standard positive electrode sheet (reference)
• Fine volume model area: NORMAL; element size: NORMAL
• Calculation times are reference values obtained using an Intel
®
Core™ i7 4-core
2.4 GHz processor.
• Calculation times depend on the processing throughput of the PC.
• Measurement times are subject to change in the event the software is updated.
Resistance range selection
functionality
• Auto range: ON/OFF (via checkbox)
Automatic selection of the optimal resistance range for potential measurement (initial
value: ON)
• Resistance range selection (when Auto range is OFF)
1000 m
Ω
, 10
Ω
, 100
Ω
, 1000
Ω
, 10 k
Ω
, 100 k
Ω
, 1000 k
Ω
Potential measurement
speed
FAST, MEDIUM, SLOW1, SLOW2 (initial value: MEDIUM)