119
Calibration
9.6 Calibration
The calibration period varies with the conditions and environment of use. It is recommended
to determine a calibration period based on those factors and to have the instrument regularly
calibrated by Hioki.
9.7 Disposing of the RM2611 Electrode Resistance
Meter
The RM2611 Electrode Resistance Meter uses a lithium battery to back up its clock. When
disposing of the RM2611 Electrode Resistance Meter, remove this battery and follow all applicable
regulations in your region.
Removing the lithium battery
DANGER
To prevent electric shock, turn off the RM2611 Electrode Resistance Meter’s
main power switch and disconnect the power cord and connection cable before
removing the lithium battery from the instrument.
CAUTION
Exercise care not to short the battery’s positive and negative terminals. Doing so may
cause sparks.
10
9
7
6
5
4
3
2
1
索引
8
Maintenance and Service
To Next Page
Loading...
