CHASSIS
- 270-
try again., if still not good to inform the special
serviceman to service the reverse mechanism.
2. If the reverse mechanism appears lacks files,
adjust the connecting nut on the striking fork to
have contraposition then fasten the reverse
mechanism again.
3. Disassemble the reverse mechanism to check
the connecting rod of the reverse mechanism
whether is rupture, if so, instead the
connecting rod.
4. Check the intension of the pull-off spring
whether is enough.
5. Check whether the gear is nicety, whethe
have jump or drop. If so, inform the special
serviceman to inspect and service.
6. To check the few aspect if it is not revers,
whether the clutch is open completely.
whether the shifts gears to lubricate is
reliably(the oil tubing in the reverse
mechanism whether is stoped up).
there is any stagnation in the reverse
mechanism. If so, inform the special
serviceman to service.
To Next Page
Loading...
