Hologic Brevera - 10.2.5 How to Clean the Technologist Display

Brevera Breast Biopsy System User Guide
Chapter 10: Maintenance, Cleaning, and Disinfecting
Page 102 MAN-04303-002 Revision 006
Note
There are many commercially available products to clean LCD displays. Any product
that is free of the ingredients or abrasives described above and used according to the
directions of the manufacturer can be safely used.
Note
There are commercially available disposable monitor drape products to drape LCD
touch screen displays. Always follow instructions from the manufacturer of the product
you use.
10.2.5 How to Clean the Technologist Display
• Disconnect the console from the electrical power source.
• Do not touch the display when working with specimens.
• Use care when you clean the outer surface of the display area.
• Always use a clean, soft, lint-free cloth to clean the display area. Microfiber cloths,
available at most stores, are recommended.
• To clean the button area of the technologist display, use a pre-moistened disinfectant
wipe or apply a disinfectant solution to a clean cloth. Wipe all surfaces with the pre-
moistened wipe or wet cloth, observing appropriate contact (wet) times. Refer to
General Information on page 99 for recommended disinfecting solutions.
• Strong chemicals and abrasives can damage the display window and should never be
used.
• Never apply pressure to the display window.
• Never use a detergent with fluorides, ammonia, alcohol, bleach, or abrasives to clean
the display window.
• Never use a spray or flow a liquid onto the display.
• Never use steel wool.
• Never use a sponge with abrasives.
Note
There are many commercially available products to clean LCD displays. Any product
that is free of the ingredients or abrasives described above and used according to the
directions of the manufacturer can be safely used.