Brevera Breast Biopsy System User Guide
Chapter 4: User Interface - Imaging Display
MAN-04303-002 Revision 006 Page 45
Search the local database for the Patient Name, Patient ID, or Accession Number.
Two tabs display at the top of the screen. These tabs are configurable. A Manager
can delete tabs and create new tabs (see The Filter Criteria and Columns Tabs in the
Patient Filter Screen on page 49).
• The Scheduled tab displays the scheduled procedures.
• The All tab displays all procedures on this CorLumina system.
You can perform many functions from this screen using the buttons in this area.
• Open: Open the procedure for the selected patient. Refer to How to Open a
Patient on page 45.
• New: Add a new Patient. Refer to How to Add a Patient on page 46.
• Edit: Edit the patient information. Refer to How to Edit the Patient Information on
page 47.
• Delete: Delete a patient from the worklist. Refer to How to Delete a Patient on
page 48.
• Filter Criteria: Use a Patient Filter. Refer to The Patient Filter Screen on page 48.
• Refresh Worklist: Update the patient list.
• Query Worklist: Search for a patient in the Modality Worklist. Refer to How to
Query the Worklist on page 50.
• Admin: Access the administration functions. Refer to System Administration
Interface on page 95.
• Log Out: Exit and return to the Startup screen.
4.2.1 How to Change the Language
1. From the Select Patient screen, select the Admin button on the right. (For complete
information about the functions on the Admin screen, refer to The Admin Screen on
page 95.)
2. Select the My Settings option.
3. Go to the second page. In the Locale field, select a language from the drop-down
menu.
4. Select Save, then select OK in the Update Successful message. The user interface
changes to the selected language.
4.2.2 How to Open a Patient
To open a patient and start a procedure, select a patient from the list, and then select the
Open button.
To Next Page
Loading...
