Brevera Breast Biopsy System User Guide
Chapter 2: General Information
Page 8 MAN-04303-002 Revision 006
2.2 Safety Information
Read and understand this manual before you use the system. Keep the manual available
during the operation of the unit.
Always follow all the instructions in this manual. Hologic does not accept responsibility
for injury or damage from incorrect system operation. For training options, contact your
Hologic representative.
The system has safety interlocks, but the user must understand how to safely operate the
system and be aware of the health hazards of x-ray radiation.
2.3 Warnings and Precautions
WARNING!
The Brevera breast biopsy system must be installed and put into
service according to the guidance provided in these instructions to
ensure its electromagnetic compatibility. Refer to the electromagnetic
emissions and immunity tables.
WARNING!
Portable and mobile RF communications equipment can affect the
Brevera breast biopsy system. Do not use portable RF communications
equipment any closer than 30 cm (12 inches) to any part of the Brevera
system, including cables.
WARNING!
The Brevera breast biopsy system console is designed to use the power
cord provided. Do not use a different power cord. Using a different
power cord can create an electrical and fire hazard. DO NOT remove
the ground wire or ground prong from any power plug. DO NOT use
an extension cord with this equipment. An adapter may be necessary
depending on the outlet used.
WARNING!
Make sure that the power cord for the Brevera breast biopsy system
console is in good condition. A damaged power cord can be an
electrical shock hazard. When disconnecting the console from power,
always grasp the plug at the insertion point and pull lightly. NEVER
pull on the cord to unplug the unit.
To Next Page
Loading...
