Hologic Brevera - Table 1: the Filter Criteria Options

Brevera Breast Biopsy System User Guide
Chapter 4: User Interface - Imaging Display
MAN-04303-002 Revision 006 Page 49
The Filter Criteria and Columns Tabs in the Patient Filter Screen
The Filter Criteria tab allows you to change the filtering options for the patient list. When
you select or deselect an option, the change shows in the results area of the screen.
Note
A Manager can save these new filters to the selected tab in the Select Patient screen (refer
to Other Functions of the Filter Criteria on page 49).
The Columns tab allows you to add more search options (for example, Age, Gender,
Date of Birth) to the filtered list. The options display as columns in the results area. To
add more columns to a filtered list, select the Columns tab, and then select the options.
Note
When you select the Open button, the Procedure screen for the selected patient appears.
Other Functions of the Filter Criteria
The Save, Save As, and Delete Tab buttons on the Patient Filter screen allow Managers to
add, change, or delete tabs in the Select Patient screen.
Table 1: The Filter Criteria Options
Option
Step
Change the current patient filter
parameters.
1. Select a tab on the Select Patient screen.
2. Select the Filter Criteria button.
3. Select the filter options.
4. Select the Save button.
5. Make sure the name of the tab you selected
is in the name field.
6. Select OK.
Create a new tab for the Select Patient
screen.
1. Select a tab on the Select Patient screen.
2. Select the Filter Criteria button.
3. Select the filter options for the tab.
4. Select the Save As button.
5. Enter a new name for the tab.
6. Select OK.
Delete a tab from the Select Patient
screen.
1. Select a tab on the Select Patient screen.
2. Select the Filter Criteria button.
3. Select the Delete button.
4. Select Yes to the confirmation prompt.