Hologic Brevera - Brevera Biopsy Mode Operation

Brevera Breast Biopsy System User Guide
Chapter 5: User Interface - Technologist Display
Page 62 MAN-04303-002 Revision 006
Biopsy
When the system is in Biopsy mode, depressing the footswitch activates the vacuum and
operation of the biopsy device. In Biopsy mode, the biopsy device can be armed and fired
with the remote control. As part of the normal cutting cycle, the system performs a brief
aspiration with each core acquisition. Removing pressure from the footswitch inactivates
or stops the device after completion of the current cycle.
Figure 36: Biopsy Screen